We've been bolstering our selection of parts for our Airsoft Sniper Rifles, to give you guys more options when it comes to upgrading your Airsoft Sniper rifle. To start with, we've brought in a new brand, Action Army. If you're looking to upgrade your Tokyo Marui Based Sniper Rifle, such as the TM VSR, or JG Bar-10, we have a range of aftermarket Airsoft Hop-Up Units, Barrels, Cylinders and more available to tweak your weapon to perfection.
Remember, before installing please ensure that you are 100% clear on how to fit the aftermarket parts, as Incorrect fitting will result in poor performance. For more help or fitting instructions please feel free to call the Workshop on: 01484 644709, or email: email@example.com.
Here are a selection new Airsoft Parts and Accessories just in from the Action Army range:
A high quality aftermarket Magazine designed for use with Tokyo Marui and Cyma brand VSR / BAR-10 6mm BB Airsoft Sniper Rifles. The magazine is constructed from Semi-Transparent Polymer, with a high tension Spring, so you can see how many rounds you have left easily. Perfect for those Airsoft Skirmishers who own a TM Base / CYMA VSR and are looking to bolster their magazine collection allowing them to play for longer without having to stop and reload.
A replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifle, to enhance and perfect the performance of your weapon. This hop-up unit is perfect for those who are looking for the perfect Aftermarket Hop-Up unit, designed to improve the precision of your rifle, or for those who want to swap out a stock hop-up unit for something a little more special.
A replacement Hop-Up unit designed and created by Action Army to fit the ARES AMOEBA STRIKER Airsoft Bolt Action Sniper Rifle, to enhance and perfect the performance of your weapon. The Hop-Up unit is CNC Machined for precision and accuracy, and designed to improve the performance of your rifle by improving the Air Seal, with the strength and rigidity of a Machined Alloy Hop-Up chamber.
A kit to upgrade Tokyo Marui Base / CYMA / JG VSR / BAR-10 Rifles, and Well MB-03 Sniper Rifles. The kit comprises of two parts: A replacement Trigger Mechanism Box, and an Upgrade Piston, which compliment each other perfectly. The Trigger Set is constructed from High Quality and Durable Steel, and the Piston is constructed from CNC Machined Aluminium with Polymer Guide Rings, and Rubber O-Rings. The Trigger Box is a One piece Trigger System, which is designed to have an extremely short trigger pull, also know as a zero trigger, for more accurate and immediate shots..
An upgrade 45 Degree piston for Tokyo Marui Base / CYMA / JG VSR / BAR-10 Rifles, and Well MB-03 Sniper Rifles with a standard Trigger Set. The Piston is constructed from CNC Machined Aluminium with Polymer Guide Rings, and Rubber O-Rings. The Piston is constructed using a CNC Process making it durable and precise, and is ported to reduce its weight.
An Airsoft Electric Powered Semi-Automatic AEG built and created by G&G as a replica of the famous US M14 Rifle. This rifle is perfect for those Airsoft Skirmishers who are looking for a rifle to fit in with the US Army load out, or for those who are looking for a rifle to convert to a DMR in the future.
Again, if you want to see all of the new Action Army Upgrade Parts and Accessories, please feel free to check out our New Product Section for Action Army Parts and Accessories.
Hope this helps ?
– Patrol Base Jonny
I've bought the new action army hop, but I dunno how to fit it, can anyone help?
Hey there! If you are unsure on how to fit any parts, or need help, or even fitting instructions please feel free to call the Workshop on: 01484 644709, or email: firstname.lastname@example.org. Hope this helps 🙂
I've got a standard TM VSR and I'm looking to upgrade the piston, which one do I need?
Hey there! If you've got the standard Trigger Set installed, it will be a 45 Degree Trigger Set, so you'll want the Orange Piston, but if you have an upgraded Trigger Set, you'll want the Blue 90 Degree Piston. If you are unsure on how to fit any parts, or need help, or even fitting instructions please feel free to call the Workshop on: 01484 644709, or email: email@example.com. Hope this helps 🙂
We've had a lot of people asking about Rails for their Amoeba AM-013 / AM-014 recently, so we thought we'd put together a blog post so you can check out Airtech Studios offering.
If you're looking to add more Rail Space to your Amoeba Honey Badger for additional attachments then look no further, Airtech Studios have created Medium and Long Length Rail Panels designed to fit onto the rifle which blend in seamlessly and blend in with the top rail on the existing rifle.
Each Rail is made from Shock and Impact resistant Nylon Polymer, meaning that is built to last, and will not snap under pressure and comes in a pack of two, and are available in both Black and Tan. The larger rails measure in at 26.5cm, and the smaller rails at 16.5cm allowing you to convert the top Rail of the Weapon into a full rifle-length rail, giving the option for even the largest sight and scope setups. The rails are designed to be compatible with 20mm RIS / RAS Rail systems, the most common rail system in Airsoft, meaning that a huge range of Aftermarket Parts and Accessories can be attached.
The rails can even be attached to the sides and bottom of the Hand Guard, meaning those who want to have a weapon setup with an Angled Foregrip and a Vertical Foregrip have enough space for both.
These rails are definitely the perfect purchase for those who own an AM-013, AM-014 or AM-015, but wish they just had that little bit more rail for attachments.
There are Four Variants Available:
Todays blog is aimed at showing you exactly how to remove the bolt. Why would you do this? For servicing and upgrading. Let's get this out of the way quickly though, if you decide to install a bigger spring you will void your warranty!
First step, locate the retaining pin, you can take your bolt out without dismantling any part of your gun. See the picture below showing the pin.
Ensure you gun is not cocked, and push this pin out with a small screwdriver. It is easy to push out, but will not fall out under its own weight.
Next up, just pull your bolt back. If it catches just pull the bolt out whilst pulling your trigger as if you were firing the rifle.
With the bolt out and the firing indicator, you will have this.
Now look at the cylinder head, you will see two dimples, using some pliers you can push and twist this off.
The result, you now have your internals spring out into your hand. Ensure these are not covered in grit and re-lube before every Airsoft game for the best results and add a tiny bit of grease on the outside of the cylinder.
Now, to re-assemble this is slightly more difficult, you can see below a trigger sear.
Push this down with a screwdriver as shown below and then slide back in your cylinder. It will require a wiggle and some patience! But it will go in.
Now with your cylinder back in, just push the retaining pin back in and you are done.
We hope you found this blog useful, yes the spring inside is an AEG spring. We have tried an M140 and got over 430fps but as previously mentioned, you do this at your own risk as it will void your warranty.
We can confirm that ARES are planning on releasing upgraded cylinders in the near future along with other unique parts.
If you enjoyed this blog remember to also subscribe to our social media pages by following the links below:
Back to top