Go back to PatrolBase.co.uk

Workshop Upgrades & Repairs

You may or may not know, but here at Patrol Base Airsoft we have a fully tooled up and staffed in-house Workshop, with Four Permanent technicians all itching to get their hands on your weapons  to do Maintenance, Upgrades, Repairs and even custom work.

All of our technicians have experience with a wide variety of Airsoft weapons, ranging from Spring Shotguns, AEG Electric Rifles, Sniper Rifles, and all the way up to Gas Blowback Pistols and Long Rifles, and with years of experience: if you've got a problem, they've probably fixed it before.


In-Store and by Post

Live close by? We can look at your weapon in-store and discuss any Workshop Work you want to do, or even give you ideas, from our store in Milnsbridge Huddersfield, between Huddersfield, Manchester, Leeds and Wakefield. If you want to make the trip worth the journey you can always visit us and then check out our Local Airsoft Site Halo Mill, open 7 days a week.

If you're further afield we can discuss any Upgrades or Work over the phone, and then post us your weapon. Once the work is completed we can post you your weapon back and take your payment over the Phone or via PayPal.

If you want call us or find out more information you can get our details via our Contact Us Page.


Weapon Maintenance and Service

Had your weapon for a while, and want to treat it to a bit of pampering? We can take your Airsoft Weapon, strip it down, clean and re-grease it to get it back in tip-top condition. If you're gun needs some further treatment, we can suggest this to you, and even carry out the work. If we spot a problem developing we can fix it with our wide range of Spare and OEM parts, and even suggest possible upgrades for the future.

A post shared by Patrol Base (@patrolbase) on

Weapon Upgrades

If you want to Upgrade your weapon, we can handle that too! Looking to improve the power of your weapon, we've got you covered! Looking to increase your range and accuracy, we can do that too! Our workshop technicians have years of experience working on peoples weapons, as well as their own personal kit, building up a vast cumulative knowledge, meaning they know the best parts to fit to achieve the results you want from your weapon. We can upgrade a wide range of weapons, ranging from Gas Blowback Pistols, to Electric AEG, even upgrading Sniper Rifles for maximum performance and range.

Once built, we can fine tune your upgraded weapon in our indoor and outdoor ranges, each with access to their own high performance SKAN Chronograph, meaning we can guarantee you can use your weapon at your local game site when you receive it.

A post shared by Patrol Base (@patrolbase) on


Weapon Downgrades

Although this sounds the wrong way around, don't worry, we offer this because we know some countries require weapons to be a lower power, or rate of fire before it is shipped. We can handle this in-house, downgrading the power for weapons to under 320 for Ireland, and locking the weapons to semi-auto for Germany.

If you need a specific downgrade for your country feel free to Contact Us for further information.


Weapon Returns

The workshop team not only handles Upgrades and Repairs, but also looks at all of the Weapon returns as well. If the unfortunate happens, and your weapon breaks, we work in-house to repair it before it is returned to you. When we receive your return it is into the Workshop Jobs System, and leave notes, so we can relay this information to you should you need it.


Two Tone Service

Our workshop team also handle all of our Two-Tone Service Jobs, Stripping, Painting, and then Rebuilding every single Two-Tone service job which passes through our doors, giving them a wide range of experience with building almost all Airsoft Replicas on the market today.

Once stripped each part is painted in our own custom built in-house self-contained and ventilated spray booth, allowing for a consistent finish.

A post shared by Patrol Base (@patrolbase) on


Contact Us

If you want to get in contact with our Workshop team via Phone you can call the sales department, and ask to be put through:

01484 644709 - Patrol Base Sales Line

If you want to get in contact with our Workshop team you can email them on:

workshop@patrolbase.co.uk - Returns and Repairs Technician

And if you have query about a repair Job you can get in contact with the returns department by emailing:

sales@patrolbase.co.uk - Patrol Base Sales Team

How long does a workshop job take?

If I send my gun to you how long will it take?

PatrolBase Jonny
Hey there! This can depend on a wide range of things, such as what you are having done! Your best bet is to get in contact with the Workshop, who will be able to give you a rough estimate on the time-scale. You can get a hold of them by calling: 01484 644709. Hope this helps 🙂

Upgrading your weapon speed?

Yo, can you guys upgrade my gun so it shoots faster?

PatrolBase Jonny
Hey there! Yes, we can upgrade your weapon to fire faster, but not only fire faster, but be reliable as well. Your best bet is to call the Workshop and let them know what you want to do, and what gun you have first so they can give you some advice. You can get a hold of them by calling: 01484 644709. Hope this helps 🙂

Posting a weapon to Patrol Base for Upgrade?

Can I post my gun to you to upgrade?

PatrolBase Jonny
Hey there! Yes, you can send us your gun via post, and we will return it to you when the work is complete. You should first get in contact with the Workshop so they can give you some advise based on your weapon. You can get a hold of them by calling: 01484 644709. Hope this helps 🙂

Written by PatrolBase Jonny, who has written a total of 74 posts.

Jonny has worked for Patrol Base for 5+ years, working in the media department and on the main website. Responsible for managing the software which runs the website, bringing new features wherever possible. You can get in contact via Facebook and Instagram.

Posted in Patrol Base News, TokyWoky | 9 Comments

9 thoughts on “Workshop Upgrades & Repairs”

  1. Lee north

    Hi is there anyway to convert a green gas glock to a co2 capsule?

    Also is it possible to convert and electric g36 to gas or just make it more powerful?

    Thank you


    1. PatrolBase Jonny

      Hey Lee,

      You can buy Co2 Magazines for WE G-Series Pistols, which I will link below. You don’t need to mod your gun, just stick the mag in. Make sure you keep your gun lubed up though, as Co2 is dryer than Green Gas 🙂


      In regards to converting an electric G36 to gas, no one has yet made a drop in conversion kit. The only Gas G36 do not really perform well in the UK either, as they’re designed for warmer country.

      Your best bet is to upgrade what you’ve got.

      If you get in contact with the Workshop, they will be able to give you some advice. I would suggest emailing Jeppe, our crazy Danish Tech, who is a pro at upgrading AEG. You can email him on:


      Hope this helps 🙂
      – PatrolBase Jonny


    1. PatrolBase Jonny Post author

      Hey Ben!

      We can certainly look into it.

      Your best bet is to give the Workshop a call to get the ball rolling. You can get hold of them by calling: 01484 644709, then ask to be put through!

      Hope this helps 🙂
      – PatrolBase Jonny


    2. PatrolBase Jonny

      Hey Ben!

      We can certainly look into it.

      Your best bet is to give the Workshop a call to get the ball rolling. You can get hold of them by calling: 01484 644709, then ask to be put through!

      Hope this helps ?
      – PatrolBase Jonny


  2. Martyn Kenny

    Hi all… plan on nipping round tomorrow to have a peek round the Halo mill shop/etc..
    But, before we do, have a bit of a problem with rifle we have.
    Seems to have a bit of a problem loading by magazine.
    Pretty sure its the receiver as shown in the pic, its barely fired 5-6 shots and this is the damage caused, to be honest, the plastic is crap, wondered if there was a metal upgrade you can install for us ??.. Cheers in advance for any help/advice. https://uploads.disquscdn.com/images/68097a6e12beb8b0209e4be9a2632c935b89f41049ac5394dbcb0343ebdfc8bd.jpg
    The gun is a ‘M82 Barrett style Galaxy G31 ‘


  3. Nathaniel

    Hi I was cleaning the barrel of my Double eagle M58A Shotgun and think I have broken the hopup, I’m not really sure whats happened, would you be able to have a look?


Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>


Back to top